Glossary; Air Filter; Assembly; Packing List - Craftsman 107.16574 Manual Del Usuario

Air Filter
Porous element contained within a metal orplastic h ousing
attached tothecompressor cylinder head which removes
impurity from theintake a irofthecompressor.
AirTank
Cylindrical component which contains thecompressed air.
Check V alve
Device t hatprevents compressed airfrom flowing b ack from the
airtank tothecompressor pump.
Cut-In
Pressure
The tow pressure at which the motor will automatically restart.
This compressor cut-in pressure is 105 + 5 PSI.
Cut-Off Pressure
The high pressure at which the motor will automatically shut off.
This compressor cut-off pressure is 135 + 5 PSI.
Electric Motor
Device which provides the rotational force necessary to operate
the compressor pump.
On/Off Power Switch
Control which turns the air compressor on or off. The pressure
switch wilt not automatically start and control the compressor
unless the manual on/off switch is in the ON ( 1) position.
NPT (National Pipe Thread)
National Pipe Thread is a U.S. standard for tapered (NPT) or
straight (NPS) threads used to join pipes and fittings.
A thread sealing tape must be used to provide a leak-free seal on
pipe threaded connections.
Pressure Regulator Knob
Regulates the outgoing pressure from the air outlet to the tool. It
is possible to increase or decrease the pressure at the outlet by
adjusting this control knob.
Pressure Switch
Automatically controls the on/off cycling of the compressor. It
stops the compressor when the cut-off pressure in the tank is
reached and starts the compressor when the air pressure drops
below the cut-in pressure.
PSI (Pounds Per Square Inch)
Measurement of the pressure exerted by the force of the air. The
actual psi is measured by a pressure gauge on the compressor.
Pump
Produces the compressed air with a reciprocating piston
contained within the cylinder.
Regulator Pressure Gauge (Outlet pressure)
Displays the current line pressure. Line pressure is adjusted by
rotating the pressure regulator knob.
Safety Valve
Prevents air pressure in the air tank from rising over a
predetermined limit.
SCFM (Standard Cubic Feet Per Minute)
A unit of measure of air delivery.
L/min (Liter Per Minute)
A unit of measure of air delivery.
Tank Pressure Gauge
Indicates the pressure in the air tank.
Thermal Overload Switch
Automatically shuts off the compressor if the temperature of the
electric motor exceeds a predetermined limit.
Duty Cycle
Duty Cycle refers to a percentage of time which the air
compressor can run continuously while performing a task before
needing to rest or cool down. Example: A 50% duty Cycle
compressor must rest for 5 minutes after running continuously for
5 minutes.
I'-'I,,!-1=1 _ ,_ I:t _'d
PACKING LIST
• Air compressor
• Coil hose
• 1/4 in. quick coupler (2 pcs.)
• Blow gun
• Thread sealing tape
• Long inflation chuck
• Tire gauge
• Owner's manual
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the compressor from the box. Make sure
that all items listed in the packing list are included.
• Inspect the compressor carefully to make sure no breakage
or damage occurred during shipping.
• Do not discard the packing material until you have carefully
inspected and satisfactorily operated the tool.
If any parts are missing do not operate the
compressor or air tools until the missing parts are replaced.
Failure to do so could result in possible serious personal
injury.
Do not attempt to modify this tool or create
accessories not recommended for use with this toot. Any
such alteration or modification is misuse and could result in
a hazardous condition leading to possible serious personal
injury.