Unfolding / Folding Up; Adjustment Options; Parking Brake Function; H-Belt - Thomashilfen SWIFTY Manual Del Usuario

Ocultar thumbs Ver también para SWIFTY:
Tabla de contenido
Folding
Unfolding
Take hold of the buggy by the top side of the push bar and firmly pull it open (the sliders will lock audibly into place).
Fold up the side plates of the seat to an upright position so that they lock securely into place. Tighten the lever on the
back of the buggy. Set the height-adjustable push bar to the desired position using the buttons on the sides. (fig. 1)
Folding up (minimum size)
Release the quick-release mechanism on the back of the buggy. Pull up the sliders on the left and right bars and hold onto
the safety bar mounted on the right. Use your upper body to push the push bar forwards and fold the buggy. (fig. 2)
TIP:
To avoid the front wheels coming into contact with the rear axle when folding the buggy, you can give the
steering forks on the front wheels a slight turn.

Adjustment options

Seat depth
Unscrew the front Allen screws (3 mm) on the seat surface, pull out the seat plate towards the front of the buggy and
then re-tighten the Allen screws. (fig. 3)
TIP:
To make setting the seat depth easier, grasp the front edge of the seat surface with one hand while pressing your
other hand against the bottom centre of the backrest.
Adjusting the backrest
Release the quick-release mechanism on the back of the buggy (using the lever), set the desired hip angle using the lever
on the back bar, then retighten the lever. (fig. 4)
Lower leg length
Release the knurled screws at the back of the tube guides of the foot support. Bring the foot support into the desired
position by pushing on the frame tube and fasten the screws again. (fig. 5).
Footrest
The footrest can be folded up for ease of transfer. (fig. 6)

Parking brake function

To engage:
Press down the brake bar with your foot.
To release:
Place your foot beneath the brake bar and lift it up.

H-belt

The Swifty rehabilitation buggy is supplied with H-belt as standard.
Opening the belt fastener
To open the H-belt, hold down the red button (1), open the clip connector (2 and 3) and release the belt (childproof
safety catch). (fig. 7)
Adjusting the shoulder belt height
Open the velcro of the back upholstery. Open the two top cam buckles and pull out shoulder belt. Then cut the backrest
upholstery in the quilted seam depending on the desired mounting height.
Pass the belts through the slit created and insert the belts into the cam buckles. Close the two top cam buckles again
and also close the velcro of the back upholstery. (fig. 8-10)
Removing the H-belt
Open the velcro of the back upholstery. Open the cam buckles and pull out H-belt. (fig. 9)
13
Tabla de contenido
loading

Este manual también es adecuado para:

Swifty

Tabla de contenido