Charger Indicator - Oregon Professional Serie Manual De Instrucciones

Charger Indicator

The LEDs on the charger display its state of operation and any faults that may prevent charging of
the battery
INDICATORS
No LED
Green LED
(blinking)
Green LED
(steady)
Red LEDs
(3 blinks in rapid succession)
For this indication, the charger
will retry every 30 seconds and
show a fast green blink during
retry
Red LEDs
(2 blinks in rapid succession)
Red LED
(1 continuous blink)
The LEDs on the battery indicate the state of the battery's charge Consult the battery's original
instruction manual for more information
10
Operation
POSSIBLE CAUSE
Charger is in standby mode
Battery is charging
Battery is finished charging
Battery is already full
Battery needs troubleshooting
Battery is too hot to charge
Charger is too hot to operate
Battery needs troubleshooting
There is a charger error
RECOMMENDED ACTION
Connect battery to charger
Allow battery to continue
charging
Allow charger to enter standby
mode or disconnect battery
Press and release button on
top of battery Verify all 5 green
LEDs light green
Press and release button on top
of battery and refer to the battery
manual's Troubleshooting
section
Leave battery in charger Battery
will automatically charge when it
has cooled
Unplug charger from AC power
and allow to cool
Press button on top of battery
and refer to the battery manual's
Troubleshooting section
Unplug charger from AC power
for 15 seconds and reconnect
Charger Model 120V - C1600