General Maintenance; Maintenance - Ryobi TOUGHTUNES P745 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 15 AFTER

MAINTENANCE

FRENCH AND SPANISH LANGUAGE SECTIONS.
REPLACING THE ANTENNA
See Figure 7, page 17.
If the radio should need a replacement antenna for any
reason, the attached antenna can easily be removed and
replaced.
 Insert a phillips head screwdriver into the antenna screw
slot.
 Turn the antenna screw counterclockwise to remove.
 Remove antenna when antenna screw has been removed.
Orient and insert replacement antenna flat end into
antenna mounting hole.
Insert the phillips head screw
 Turn the antenna screw
clockwise to attach
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
WARNING:
Upon removal, cover the battery pack's terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects and/
or body parts as short circuit may result. Keep away from
children. Failure to comply with these warnings could
result in fire and/or serious injury.
14 - English
into the antenna screw hole.
with the phillips head screwdriver
and tighten.
Tabla de contenido
loading

Tabla de contenido