You can
press
the "Cubed" or
"Crushed"
option
of Ice to be dispensed. You can touch
the "Water"
button
water mode.
When you touch the Ice Type button,
the cubed or crushed ice mode which
you choose will be activated, and the
Cubed "
" or Crushed "
lights up.
If you don't need ice, turn the function
off to save on water and energy
consumption.(See Ice Off above.)
If you need water, please touch the
"Water" button, and the water icon
"
" will light up. The mode is then
set.
"Water storage box Alarm"
If the water storage box part
is not correctly installed or not
installed, the water storage box
alarm will come on for reminding
users. You can clear the alarm
by holding "Eco" button for 3
seconds.
to choose the t
ype
to activate the
" ice icon
Note!
If water is not dispensed or
dispensing slowly you need to
check whether the water storage
box part is correctly installed or not
and make sure there is enough
water in the water storage box .
When you touching the "water" button
for water, the water pump will start to
draw, there is little nosie when the
water pump working, it is normal.
"Energy Save"
"
Filter Reset 3
You can touch this button to turn
Energy Saver mode on and off .
When you turn Energy Saver on, the
Energy Saver icon "
The temperature of the fridge is
automatically switched to
freezer to
-
17
℃.
and the icon goes off.
Note!
The control panel will light up when
the door is open or you touch any
button.
The light will go off without touching
any button or the doors have been
closed for one minutes.
When the refrigerator is powered
on, all the icons of the control panel
will light up for 3 seconds, and a
buzzer sounds. The Child Lock is off.
And the temperature setting reverts
back to the previous setting.
,
" lights.
6
℃
and the
If Energy Saver is off
13