Introduction; Specifications - JET J-2500 Instrucciones De Operación

Introduction

The JET 15-Inch 16-Speed Drill Presses and 20-Inch 12-Speed Drill Presses, Models J-2500, J-2530 and J-2550,
feature rugged cast iron design with ground-steel columns for drilling accuracy in metal, wood, and plastic. The
head casting features a ball bearing spindle assembly, supported by four permanently-lubricated, heavy duty ball
bearings that are mounted in an enclosed quill for extended life.

Specifications

Model
Stock Number ............................................. 354400 ............................. 354401 ............................. 354402
Model Type ................................................. 15-Inch Floor .................... 15-Inch Bench .................. 20-Inch Floor
Drilling Capacity
Cast Iron ................................................. Up to 5/8 In. ...................... Up to 5/8 In. ..................... Up to 3/4 In.
Steel ....................................................... Up to 1/2 In. ...................... Up to 1/2 In. ..................... Up to 5/8 In.
Drill to Center .............................................. 15 Inches ......................... 15 Inches ......................... 20 Inches
Motor
Rating ..................................................... 3/4 hp, 1-Phase ................ 3/4 hp, 1-Phase ................ 1 hp, 1-Phase
RPM ....................................................... 1725 ................................. 1725 ................................ 1725
Full Load Amperage ................................ 9.0/4.5 .............................. 9.0/4.5.............................. 14/7
Voltage............................................115/230V (prewired 115V).......115/230V (prewired 115V) ..... 115/230V (prewired 115V)
Column Diameter......................................... 2-7/8 In. ............................ 2-7/8 In. ........................... 3-5/8 In.
Quill
Diameter ................................................. 1-7/8 In. ............................ 1-7/8 In ............................ 2-1/4 In.
Travel ..................................................... 3-1/8 In. ............................ 3-1/8 In. ........................... 4-3/4 In.
Table
Overall .................................................... 11-1/2 x 11-1/2 In. ............. 11-1/2 x 11-1/2 In. ............ 18-1/2 x 16-1/2 In.
Working Surface ..................................... 9-1/2 x 9-1/2 In. ................ 9-1/2 x 9-1/2 In. ................ 15-1/2 x 13-1/2
Travel ..................................................... 24 In. ................................ 15-1/2 In. .......................... 21-1/2 In.
Base
Size ........................................................ 11 x 19-1/2 In. .................. 10-1/2 x 18 In. .................. 22-3/4 x 17-3/4 In.
Working Surface ..................................... 7 x 7-1/2 .......................... 8 x 8 ................................. 13 x 14-1/2
Chuck Size .................................................. 5/8-In., Key Chuck ............ 5/8-In., Key Chuck ............ 5/8-In, Key Chuck
Overall Dimensions
Length .................................................... 31 In. ................................ 31 In. ............................... 33-1/2 In.
Width ...................................................... 13 In. ................................ 13 In. ............................... 18-1/2 In.
Height ..................................................... 63 In. ................................ 39-1/2 In. .......................... 67 In.
Spindle to Table (Max.) ................................ 24 In. ................................ 15-1/2 In. .......................... 24 In.
Spindle to Column (Max.) ............................. 7-1/2 In. ............................ 7-1/2 In. ........................... 10-1/2 In.
Spindle
To Base .................................................. 48 .................................... 24 .................................... 43-1/2
Taper ...................................................... MT-2 ................................ MT-2 ................................ MT-3
Number of speeds .................................. 16 ..................................... 16 .................................... 12
RPM ...................................................... 200, 290, 350, 430............. 200, 290, 350, 430............ 150, 260, 300,
Shipping Weight .......................................... 185 pounds ...................... 157 pounds ...................... 321 pounds
J-2500
500, 580, 640, 720
800, 870, 1440, 1630
1820, 2380, 2540, 3630
6
J-2530
500, 580, 640, 720
800, 870, 1440, 1630
1820, 2380, 2540, 3630
J-2550
440, 490, 540,
1150, 1550, 1840,
2220, 2950, 4200