Warning And Safety Instructions - Miele professional A 800 Instrucciones De Manejo

Tubo filtrante
Ocultar thumbs Ver también para A 800:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
en - Warning and Safety instructions
To avoid the risk of accidents and damage to this tubular filter
please read these instructions carefully before using it for the first
time.
Keep these instructions in a safe place where they are accessible
to users at all times.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.
The tubular filter must only be used for filtering the wash and rinse
water in particular Miele mobile injector units and baskets. Altera-
tions, conversions and modifications are not permitted.
The tubular filter captures particles ≥ 0.07 mm. Smaller particles
can pass through the filter. For this reason the user should inspect
narrow lumen items to eliminate any risk.
Check the tubular filter before use for visible damage or external
soiling. A damaged or soiled tubular filter must not be used under any
circumstances.
Clean the tubular filter at least once a week to ensure it maintains
the correct filtration efficiency.
The O-rings at either end of the tubular filter provide the correct
seal. The tubular must not be used without these O-rings.
Worn O-rings must be replaced with original Miele O-rings only as
they are the only ones suitable for use in your machine.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety Instructions.
27
Tabla de contenido
loading

Tabla de contenido