Idiomas disponibles
Idiomas disponibles
2 Press the DOLBY SURROUND
button again and
hold it down until the center speaker mode to be
selected appears.
When selecting the DOLBY DIGITAL SUR or DOLBY PRO
LOGIC mode in step 1:
"NORMAL;
"WIDE
and "PHANTOM"
appear
in turn.
When
selecting
the 3 STEREO
mode
in step 1:
"NORMAL'
and "WIDE
appear
one after the other.
Depending
on the sound source or listening
condition,
surround
effect
may not be obtained
even
when
the
Dolby
Digital
Surround
or Dolby Pro Logic is selected.
The full Dolby Digital Surround
or Dolby Pro Logic effect cannot
be obtained
when
using software
not recorded
in the Dolby
Digital
Surround
or Dolby Pro Logic system.
In this case, use
the DSP surround
system
instead
(see page 9).
When headphones
are plugged
in:
- The Dolby Pro Logic system
is automatically
canceled.
- The Dolby Digital
Surround
mode is automatically
changed
to "2CH STEREO."
While headphones
are plugged
in:
- The Dolby Pro Logic cannot
be turned
on.
- The "DOLBY
DIGITAL
SUR" or "3 STEREO
mode
of the
Dolby Digital Surround
cannot
be selected.
ADJUSTING
SPEAKER LEVEL
BALANCE
214
1
3
1
2,4
"UPPM,
DOWNM
The unit is equipped
with a built-in test signal generator
called a
noise sequencer
for easy balance adjustment
of all five channels.
The sequencer outputs a
noise signal that "travels" from channel
to channel,
enabling
the simple
adjustment
of sound
level to
achieve
the same apparent
loudness,
at your listening
position,
from each channel.
1
2
Select the Dolby Digital Surround
(except "2CH
STEREO")
or Dolby Pro Logic mode according
to the current
type
and placement
of your
speakers.
(See page 14.)
Press the MANUAL
SELECT
button and hold it
down for about two seconds
until "L/R
OdB"
appears.
A noise signal is sent to each channel
in turn as follows:
DOLBY DIGITAL SUR (DOLBY PRO LOGIC) NORMAL
or WIDE mode
+
L/R OdB (Left front speaker)*
CEN OdB
(Center speaker)
UR ~dB (Right front speaker)*
*
S-R OdB (Right surround speaker)
$
S-L OdB (Left surround speaker)
I
15
ENGLISH
Capítulos
