Monacor TVCCD-360 Manual De Instrucciones página 9

•
If the camera is used for purposes other than originally
intended, if it is connected in the wrong way or not repaired
by skilled personnel, no liability can be taken over for pos-
sible damage.
3 Applications
The black/white camera TVCCD-360 has especially been
designed for monitoring and alarm systems. Due to its small
dimensions an easy mounting is possible at any desired
place.
4 Lenses
At the TVCCD-360 all lenses with a C mount can be screwed.
As the camera is equipped with a connection for an iris con-
trol (2), especially lenses with a video-controlled iris are
recommended, e. g. MONACOR VWL-813A. Due to the
installed automatic gain control (AGC) also lenses with a
manual iris adjustment can be used.
To connect a lens with a video-controlled iris a plug is in-
cluded. Screw off the inside plug sleeve (fig. 3), and solder the
cable of the lens at the plug acc. to fig. 2:
Pin 1 = video signal 1 Vpp for the iris control
Pin 2 = ground
Pin 3 = operating voltage 12 V
Pin 4 = ground
Attention! The lenses of the lens assembly and the CCD
image sensor chip must be protected against dust or other
impurities and must not be touched with the fingers in any
case.
for the lens
GB
9