Introduction; Front Panel - Schulz Control I Manual De Instrucciones

INTRODUCTION

1. Introduction
The Electronic Interface aims to provide the user with the main information regarding compressor control, monitoring of measured values,
protection of several components of the compressor, and maintenance information. The existing parameters in the Electronic Interface
may be modified according to the real usage needs of the compressor, in a simple and secure way.
Before performing any modification in the interface parameters, read the whole manual. In case of doubt, consult the nearest
SCHULZ Costumer Service Center.
2. Electronic Interface
The interface has an illuminated display at the front panel, with six keys and an emergency button, as shown in the picture below:
Display
Keys

FRONT PANEL

3. Front Panel
Each symbol on the display has a specific function, as described below:
1 - Main Value 0.1 a 999
2 - Main Value Unit BAR, PSI, °C, °F
3 - User Menu, item value 0.1 a 99999
4 - User Menu, item unit BAR, PSI, °C, °F, Hr, LHr
5 - Operation on,
6 - Errors and maintenance symbols:
motor running, in load.
maintenance,
KEYS
Emergency button
PE
PSI
BAR
faults: alarms /errors.
21
FUNCTIONS
Start
Stop
Up or increase value
Down or decrease value
Reset
Enter