Base Settings - Fonexion ideus ITDECT200 Manual De Usuario

USER GUIDE
Call log operations:
You can save a number appearing in the registry list as a Phonebook contact, erase the
selected entry or remove all the entries on each list category (outgoing, incoming or missing).
Just press OK when revising a number and select "Add to Phonebook", "Delete" or "Delete
All".
6

BASE SETTINGS

To review and configure the settings for the base, access to "BS SETTINGS" on the menu
by pressing OK and browsing thorugh the options with the direction keys. You can set the
following options:
Delete handset:
If you select this option, the registration link between the base and the handset will be broken,
so you temporary won't be able to perform any usual action with the phone, just until you
register the handset again in the corresponding base.
In order to complete the deleting process, you will be forced to enter the 4 digit security code
(or PIN). The default PIN number is "0000"
Dial mode
You can select "Pulse" or "Tone". By default, the value "Tone" is set.
Flash Time
You can select 100/300/600 or 1000 ms.
Modify the PIN number:
Select "MODIFY PIN" using the direction keys on the menu. The LCD will be showing "PIN?".
Prior to customize your own PIN, you must enter the old PIN before (0000 by default). Then
enter your new PIN twice. Once validated, press OK to confirm the changes.
Base default
Go to "BS DEFAULT" in the menu and press OK. After entering the security PIN code, the base
will be restored to its factory default settings.
7 HS SETTINGS
Browse the menu to "HS SETTINGS" using the direction keys. You'll be able to change the
following settings:
Alarm
Access to the "Alarm" option and select the status (ON/OFF). Press OK to confirm,
Enter the exact time you want the Alarm to be launched. Use the direction keys to set
the desired number and then press OK to confirm.
ITDECT200
25
EN