Setting The Dmx Start Address; Using Subaddresses - Leuchtkraft PARC-56/RGB Manual De Instrucciones

5.3.3 Setting the DMX start address

For separate control of all DMX units connected to
the light controller, each unit must have its own start
address . If the first DMX channel of the spotlight
is to be controlled by the light controller via DMX
address 17, for example, set the start address on the
spotlight to 17 . All other DMX channels of the spot-
light will be automatically assigned to the following
addresses . The following table is an example with
the start address 17:
Number of DMX addresses
DMX channels
3
4
5
10
Fig . 2 DMX address assignment for start address 17
1) Press the button MENU repeatedly until the high-
est menu level has been reached .
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display indicates
and a number between 1 and 512 .
4) Use the button UP or DOWN to set the start ad-
dress .
5) Now the spotlight can be operated with the light
controller .
If not, go to the menu item
the button ENTER . If the display indicates
use the button UP or DOWN to set the indication
to .

5.3.4 Using subaddresses

With subaddresses, it is possible to independently
control up to 66 spotlights (spotlight groups) via
a single DMX start address . Thus, the maximum
number of DMX units that may be controlled is
substantially increased . The spotlights with a sub-
address are selected via DMX channel 10 (fig . 8) .
All spotlights with a subaddress may be controlled
in sync if DMX channel 10 is set to a DMX value
smaller than 10 .
1) Set the spotlight for the control via 10 DMX
channels, ☞
setting
2) Press the button MENU repeatedly until the high-
est menu level has been reached .
3) Press the button UP or DOWN repeatedly until
the display indicates
16
Next possible start
address for the
assigned
succeeding DMX unit
17 – 19
17 – 20
17 – 21
17 – 26
.
chapter 5 .3 .2 (menu item
) .
.
4) Press the button ENTER . The display indicates
and a number between 01 and 66 .
5) Use the button UP or DOWN to set the sub address .
6) Press the button MENU repeatedly until the dis-
play indicates
7) Press the button UP three times so that the display
indicates
8) Press the button ENTER . The display indicates
9) Press the button UP or DOWN repeatedly until
the display indicates
10) Press the button ENTER . If the display indicates
20
, the function for subaddress selection is ac-
21
tivated . If it indicates
22
DOWN to set the indication to
27
11) To be able to control the spotlight by DMX, press
the button MENU twice to return to the highest
menu level .
12) To be able to operate the spotlight, set the DMX
channel 10 at the light controller to the DMX
value that corresponds to the sub address of the
spotlight:
Sub-
address
all
1
2
3
and press
4
,
5
6
7
8
9
10
11
12
13
14
15
16
17
18
,
19
20
21
22
Fig . 3 Selection of spotlights with a subaddress via DMX
channel 10
again .
.
, , , ,
.
, use the button UP or
DMX Sub- DMX
value address value
000 – 009
010 – 019 23 212
020 – 029 24 213
020 – 039 25 214
040 – 049 26 215
050 – 059 27 216
060 – 069 28 217
070 – 079 29 218
080 – 089 30 219
090 – 099 31 220
100 – 109 32 221
110 – 119 33 222
120 – 129 34 223
130 – 139 35 224
140 – 149 36 225
150 – 159 37 226
160 – 169 38 227
170 – 179 39 228
180 – 189 40 229
190 – 199 41 230
200 – 209 42 231
210 43 232
211 44 233
oder .
.
Sub- DMX
address value
45 234
46 235
47 236
48 237
49 238
50 239
51 240
52 241
53 242
54 243
55 244
56 245
57 246
58 247
59 248
60
249
61 250
62 251
63 252
64 253
65 254
66 255