The VADO SL is equipped with a built-in diagnostic system to automatically check and identify the functionality
of the system. If the system detects an error, the TCU display will alert the user with an error code of red and blue
LEDs, as shown below.
If you receive such an error, please restart the system. If the error message continues to be shown, please contact
your Authorized Specialized Retailer for further instructions. Depending on the type of error message, the system
may be switched off automatically. In any case, the bicycle can be ridden without motor support, with the system
turned off.
7.6
ERROR
1.
BATTERY ERROR
2.
BATTERY NOT FOUND
3.
MOTOR ERROR
4.
MOTOR NOT FOUND
5.
BATTERY & MOTOR ERROR
6.
TCU COIN CELL BATTERY LOW
7.
RANGE EXTENDER ERROR
13
7.8. ERROR CODES
1
5
SOLUTION
For Error Codes 1-4 try the following solutions.
•
•
•
Contact your Authorized Specialized Retailer.
Replace the coin cell battery in the TCU.
•
•
•
2
6
Reboot your bicycle.
Check Mission Control App for more information.
If the problem persists contact your Authorized Specialized Retailer.
Check the RE plug is inserted correctly into the charge port and locked.
Disconnect the RE and check for water in the plug.
If the problem persists contact your Authorized Specialized Retailer.
3
7
4