NGM WINN Guía Rápida página 17

Inserting the battery
Your device is provided with a lithium-ion battery and is
designed to be used exclusively with original NGM batteries and
chargers. The battery must be inserted into the backside of the
phone (see illustration below). Align the battery contacts with
the phone connector inside the battery tray, and let it slide
down in position. When done, put the hind cover of the phone
back and make slight pressures along the cover rim, as shown
with the arrows.
Charging the battery
Please charge the battery completely before starting to use the
device. Use the provided USB cable, connecting one end to the
USB connector placed on the side of the phone (first remove
the protection cover) and the other end to the provided wall
socket adaptor. While the battery is charging, an animation on
screen will show the charging progress. Once charge is
completed, the phone can be disconnected from the grid. The
phone can also be charged by connecting it to a PC USB port.
Warning: Do not connect the phone to a booting-up or running
down PC to avoid voltage jumps.
While the battery is charging, an animated icon on screen will
show the charging progress. Once that the battery icon is full,
the phone can be disconnected from the grid.
Note: use only the provided USB cable for recharging the device.
Please charge the battery indoors, in a dry and favorable
environment. It's normal for the battery to get slightly warm
during the charging process. The battery will reach the full
capacity when cycled several times.
Warning: in order to preserve the correct functioning of the
device and in order not to compromise warranty, the sole use of
original NGM battery chargers
recommended.
and accessories are
17