Illumination - KAHLES K4i Manual De Instrucciones

Tripple turn turret
There are three rows of numbers (X) on the elevation
adjustment. If the indicator
7
pin (7) is flush to the top of the
adjustment you are using the
bottom row of numbers (first
rotation). If the indicator pin is
X
raised up about 1 mm (red),
you are using the middle row
of numbers (second rotation).
Symbol picture
If the indicator pin is raised
up about 2 mm off the housing (white and red), the highest
row of numbers (third rotation) is in use.

9. ILLUMINATION

E
Depending on model/type (pictures shown from left to right: K624i | K4i | K15i)
Most KAHLES rifle scopes are equipped with illuminated
reticles. To switch on the reticle illumination turn the
illumination switch towards clockwise direction. The
illumination intensity will get brighter or lower by turning
the adjustment switch greater or lesser. The adjustment can
be turned in direction to the off point or to the desired
intensity setting. The illumination is switched off when the
indicator on the illumination adjustments allied with the off
marking on the tube. All of our K-models have the automatic-
off function of the reticle illumination integrated. If there will
be no brightness adjustment over a period of about 2 hours,
the reticle illumination automatically switches off. To restart
the reticle illumination after the automatic-off is activated,
you have to switch it completely off and on again. In any case
to prevent depletion of the battery, turn off the reticle
illumination when not in use.
Never miss THE MOMENT!
25
K AHLES –