Standard Tool For K318I And K525I; Mounting Of K18I Throw Lever; Cleaning - KAHLES K4i Manual De Instrucciones

12 STANDARD TOOL FOR K318i AND K525i

symbolic picture

13 MOUNTING OF K18i THROW LEVER

The K18i includes two different throw levers. These can be
easily changed and also the position of throw levers could
be changed stepless, due to the individual needs. Therefore
just open the screw with the torx wrench till the throw lever
can easily be pulled off. Then the other throw lever have to
be pulled on and fixed with the screw at the position which
is needed. The screw should just be tightend hand-screwed.

14 CLEANING

We have designed all elements and surfaces to require
very little care.
KAHLES OILPHOBIC ™ lens coatings makes cleaning
objec tive lenses and eyepiece lenses easy, especially
when cleaning dried-on mineral deposits (e.g. water marks
from condensation). To ensure the long-lasting optical
quality of your rifle scope, you should keep the glass
surfaces free from dirt, oil and grease.
When cleaning the lenses, first remove larger particles with
an optical lens brush. For subsequent thorough cleaning,
30
An Allen-key is stored in the cap of
the K318i and K525i illumination
unit. It can be used to screw and
unscrew the turret's screws.
symbolic picture