Phonocell 6/853 Manual De Instrucciones página 17

Coupling for Interphone-communication
GB
BLUETOOTH
INTERCOM
To use the 6/853 for Interphone-communication, couple two 6/853-devises
to each other, as follows:
• The two 6/853-devices must be at a max. distance of 1 m from each other.
• Keep key, of one only Device, pressed for about 3-5 seconds. As
soon as the coupling-mode gets activated, the LED will start flashing RED
and BLUE.
• Now keep key of the other Device pressed until the LED turns BLUE
and remains lighted.
• As soon as the two Devices have been successfully coupled, the BLUE
LED, of both Devices, will flash two times every 4 seconds.
General information:
Coupling-procedure will take 2 minutes. If no connection takes place after
that time, 6/853-device will switch to stand-by-mode.
• To resume, switch-off Device and repeat the procedure.
• The Device can memorize up to 8 mobile-phones. Beyond that number,
the first phone will be replaced by the last one.
• Whenever the mobile-phone is at a greater distance than 10m from the
Device, the connection will fall but automatically be regained as soon as the
mobile-phone returns within the 10m-range. Should the mobile-phone not
be fit for automatic re-connection, press key .
• Each time the Device is switched-on, it will automatically connect with the
lately connected phone.
• To connect a new Device, de-activate the Bluetooth-function of the
lately connected mobile-phone and effect the coupling-procedure.
• The Device can connect with 2 mobile-phones contemporaneously,
without Interphone-communication. When Interphone-communication is
activated, the Device can connect with 1 mobile-phone only.
• The Device will switch-off automatically, after 5 minutes, if no connections
are demanded during such time.
17