DieHard DH157 Manual Del Propietário página 5

Do not attempt to connect the converter to any other power source, including
1.17
an AC power source. Connecting to a 6V or 16V battery will cause damage
to the converter.
Do not modify the AC or USB receptacle in any way.
1.18
Do not try extending or otherwise changing the 12V power cord attached to
1.19
your converter.
Incorrect operation of your converter may result in damage and personal injury.
1.20
This device does not include an internal Ground Fault Circuit Interrupter
1.21
(GFCI).
Use only 15A fuses.
1.22
Restrictions on Use: This converter may not be used with life support
1.23
devices or systems. Failure of this converter can reasonably be expected to
cause failure of that life support device or system, or to affect the safety or
effectiveness of that device or system.
2. CONVERTER FEATURES
LED indicator light (Green = Power ON, Red = Overload, Alarm)
1.
Standard electrical 120V AC outlet
2.
12-Volt power plug
3.
USB port
4.
Low-battery protection
5.
3. BEFORE USING YOUR POWER CONVERTER
When you turn on a device or a tool that runs on a motor, the device goes
through 2 stages:
Start Up – Requiring an initial surge of power (commonly known as the
1.
"starting" or "peak" load).
Continuous Operation – Power consumption drops (commonly known as
2.
the "continuous load").
The wattage (WATTS) or amperes (AMPS) can normally be found stamped
or printed on most devices and equipment, or in the user's manual.
Otherwise, contact the manufacturer to find out whether the device you want
to use is compatible with a modified sine wave.
• 5 •