INTERTECHNO ITWR-3501 Manual De Instrucciones página 20

GB
The wireless power switch ITWR-3501 is suitable for wirelessly switching
devices on/off where high performance is required.
To be installed in the power supply of lamps or permanently wired
electrical appliances.
With a switching capacity of up to 3500 watts and a compact size, any
conventional socket can be made remote controllable!
(a deep flush-mounted box required.)
All teaching transmitters
and all transmitters for scene switching
made by intertechno can be used.
Mounting (only to be carried out by a qualified electrician):
1.) Turn off the fuse.
2.) Conductor (phase) and neutral conductor are connected to terminals
1 + 4. (Fig. 1)
The connections 2 + 3 are connected to the power supply of the
consumer (lamp or electronic appliance).
Connecting the plug socket to make it remote controllable!
(Fig. 2)
Encoding (Fig. 3)
3.) Turn on the fuse again.
The LED will shine for 10 seconds, this means that the wires were
connected correctly.
4.) Briefly press the learn button (L) on the module with a pointy object
(e.g. paper clip, ballpoint pen).
The LED will flash.
5.) Press the ON button on the transmitter.
The LED will flash 3x as confirmation.
The encoding is now complete.
If no signal is transmitted within 12 seconds, the learning process is
automatically aborted.
A total of 32 different codes or teaching transmitters (no letter and
number encoding) can be taught in.
The first code will be deleted if more codes are entered.
The encoding remains saved even after a power cut.
Operating instructions
ITWR-3501
3
›