Connecting Cables - Eizo FlexScan P1700 Manual Del Usuario

Prior to use

Connecting Cables

Attention
• When replacing the current monitor with an P1700 monitor, be sure to change the PC settings for
resolution and vertical frequency to those which are available for the P1700 monitor referring to the
resolution table (back of cover page) before connecting the PC.
1
Check that the monitor and the PC are powered off.
2
Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on the
PC
D-sub mini 15-pin
connector
D-sub 15-pin
connector
3
Plug the power cord into a power outlet and the Power connector on the monitor.
NOTE
• Adjust the screen tilt to the best condition for working.
Displaying Screen
1
Press to turn on the monitor.
2
The monitor's Power indicator lights up green and the screen image appears.
3
When the monitor and the PC are turned on for the fi rst time, the Auto
Adjustment function operates and adjusts clock, phase and screen position.
The screen vibrates slightly about 5 seconds during the Auto adjustment, but it will return to normal after
adjustment.
(For details of the Auto Adjustment function, refer to the User's Manual on the CD-ROM.)
Installation Setting/Adjustment
Signal cable MD-C87 (supplied)
Analog connection
Macintosh Adapter (optional) and
signal cable MD-C87 (supplied)
Analog connection
Troubleshooting
Connectors on the
monitor
D-sub mini 15-pin
connector
3