TUBES ASTRO Manual De Uso página 18

the extra features icon at top right and
select "Identify Device".
RESET
This procedure resets the temperature,
weekly programming, open window
detection and metering of the minutes
before changing the filter to the default
settings. Additionally, the Wi-Fi settings
are reset (procedure required if you
want to connect the device to a diffe-
rent network).
To reset the device to factory settings,
you must unplug it and plug it back in
again. Immediately after plugging it
back in again, as soon as the two LEDs
light up, touch both touch controls at
the same time for at least 10 seconds.
You will then hear 5 beeps, signalling
that the reset procedure has begun.
(This is the same procedure as the one
performed to enable/disable Wi-Fi con-
nection; however, you need to ignore
the beep you will hear after 5 seconds,
and keep touching the controls for at
least 10 seconds.)
During the reset, both the MODE and
the ON/OFF controls
nating - a WHITE FLASHING light. When
the reset has ended, a single beep
signals that the operation has been
completed.
NB: to reset the setting, the Astro Wi-Fi
must be turned on. If the Wi-Fi is not
turned on, it will not be possible to reset
Astro.
MALFUNCTIONS
In the event of malfunctions, the touch
control LEDs will flash. The following
malfunctions are possible:
Overturn Alarm
If the device is accidentally knocked
over and overturned, ventilation and
heating are temporarily turned off. The
MODE control signals the anomaly
with a FLASHING WHITE light.
When it is returned to the correct posi-
18
emit - alter-
cod. MAN#AST - Settembre/September 2019
tion, the device goes back to the mode
in which it was operating before being
overturned.
NTC Alarm
If the device detects a temperature pro-
be malfunction, heating is temporarily
turned off. Ventilation on the contrary
remains on for two minutes and then
the top is automatically lowered and
the device switches off.
The two LEDs emit synchronised FLA-
SHING DARK RED lights. This alarm
indicates a temperature probe malfun-
ction. Please contact the Tubes Techni-
cal Service.
Motor Alarm
If the device detects an obstruction
while raising or lowering the top shelf,
ventilation and heating will be turned
off immediately. Do not put heavy
objects on the top shelf because the
device may detect them as obstructions
when raising it.
• If this happens while raising the top
shelf, the motor is immediately shut
down;
• If this happens while lowering the top
shelf, it is raised again before the motor
is shut down.
The two LEDs emit alternating FLA-
SHING DARK RED lights. Remove the
obstruction and return the device to
the previous mode by touching the
MODE control .
Filter Alarm
If the filter is accidentally removed or
if you try to replace it with a new one
while the device is in operation, venti-
lation and heating is immediately swi-
tched off. The MODE control
the anomaly with a FLASHING WHITE
light. After the filter is correctly inser-
ted, the device will return to stand-by
mode. We recommend replacing the
filter only after unplugging Astro from
the main power supply.
signals