Protac SenSit Instrucciones De Uso página 14

Dismantling instructions before wash:
1. Remove the innerbag from the headrest.
2. Remove the ball bags from side-/ neck wings. The ball bags must be washed separately.
The included laundry bag must be used.
3. Zipp off the seat cover.
4. Detach the inner bag, with balls and granulate, from the velcro in the back and take it out
of the chair.
5. Zipp off the bottom cover.
6. Unzip the chambers for the back and front-foam plates at the bottom.
7. Remove the front and back foam plates.
DK
8. Close all zippers. Zipp seat / bottom covers to the cover, before washing.
GB
Assembly after wash:
1. Unzip the seat and bottom cover.
DE
2. Unzip the front foam plate chamber.
3. Insert the front foam plate in the chamber, remember to turn the side with the plastic
plate inward. Close the chamber with the zipper.
FI
4. Unzip the chamber for the back foam plate.
5. Insert the back foam plate in the chamber, remember to turn the side with the plastic
plate inward. Close the chamber with the zipper.
FR
6. Place the innerbag inside the cover. Make sure the velcro pieces fit at the back
7 Zip on the seat cover. Attach the velcro on the seat cover to the velcro on the inner bag.
8. Insert the innerbag in the headrest, the ball bags for neck and side wings d in the
NL
chambers. Closes with zipper. Remember to attach the ball bags to the neck and side wings
inside with velcro.
SE
Find videofilm showing how to assemble the SenSit chair at: www.protac.dk
ES
Please note! This is a job for two people!
IT
14