Replacing The Fuse; Technical Specifications - Futurelight PRH-Digital Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Max. power output (safety power outlet):
Max. total current (safety power outlet):
DMX-control-channels:
DMX-512-connection:
Connections (signals are transmitted within the device):
Audio:
Video:
Aerial:
Rotation-speed: approx.
Dimensions (LxWxH):
Max. tearing load:
Max. pressing load:
Max. dimensions of mountable objects (LxWxH):
Weight (net):
Fuse:
Fuse (safety power outlet):
Accessory:
FUTURELIGHT CP-240 controller
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
Please note: Every information is subject to change without prior notice. 28.07.2009 ©
230 V AC, 50 Hz ~
2400 W
2300 W
10 A
4
5-pin and 3-pin XLR
Audio HDMI/DVI, RCA l/r
Video HDMI/DVI, YPbPr RCA,
s-video RCA, VGA 15 pins
coaxial
4 RPM
540 x 500 x 285 mm
80 kg
80 kg
860 x 640 x 150 mm
35 kg
T 1 A, 250 V
T 10 A, 250 V
No. 51834265
No. 51860102
No. 51860110
48/90
00029992.DOC, Version 1.3
Tabla de contenido
loading

Este manual también es adecuado para:

51837620

Tabla de contenido