Upgrade By Usb; Remove Usb Device Safely; Network Setting; Wifi Manager - Engel RS8100HD Manual De Usuario

2 In the card information menu, you can select each
item by pressing [Up/Down] Key and press OK to
enter..
6.5

Upgrade by USB

When you enter to "Upgrade By USB" menu, you
will see a screen as below:
Upgrade Mode has only 1 option: All Code, it
means that you can only upgrade whole file to your
STB's flash. Please rename your new sw file name to
be the format "all*.bin", * means any others string is
acceptable, but the initial 3 letters must be "all" and the
extension name must be ".bin". Then Press OK key to
start upgrade by USB.
6.6

Remove USB device safely

When highlight on this item, you can safely remove USB
device by press [OK] key.
The other way is pressing [USB] key in the remote
control
The other way is that pressing "USB" hotkey on remote
controller in full screen.
6.7

Network Setting

Move the highlight to "Network Setting" and press [OK]
key. It will display "Network Setting" as below:
6.8

WIFI Manager

Move the highlight to "WIFI Manager" and press [OK]
key. It will display "WIFI Manager" as below:
19