Defiant DF-5936-BK Guía De Uso Y Cuidado página 10

Troubleshooting (continued)
Problem
The light comes on for no
apparent reason.
The lights stay on continuously.
The lights flash on and off.
Possible Cause
The motion sensor may be sensing
small animals or automobile traffic.
The "SENS" control is set too high.
The outside temperature is much
warmer or cooler than a person's body
heat (summer or winter).
The light fixture is wired through a
dimmer or timer.
The motion sensor may be picking up a
heat source, such as an air vent, dryer
vent, or brightly painted, heat-reflective
surface.
The light fixture is wired through a
dimmer or timer.
The light fixture is on the same circuit
as a motor, transformer, or fluorescent
bulb.
Heat or light from the bulbs may be
turning the motion sensor on and off.
Heat is being reflected from other
objects and may be turning the motion
sensor on and off.
10
Solution
Decrease the "SENS"
setting or reposition the
motion sensor.
Decrease the "SENS"
setting.
Decrease the "SENS"
setting.
Do not use a dimmer or
timer to control the light
fixture. Replace the dimmer
or timer with a standard on/
off wall switch.
Decrease the "SENS"
setting or reposition the
motion sensor.
Do not use a dimmer or
timer to control the light
fixture. Replace the dimmer
or timer with a standard on/
off wall switch.
Install the light fixture on
a circuit without motors,
transformers, or fluorescent
bulbs.
Reposition the lamp heads
away from the motion
sensor.
Decrease the "SENS"
setting or reposition the
motion sensor.