Tempo MM200 Manual De Instrucciones página 10

Operation
Operation
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
1. Refer to the Settings Table. Set the selector to the proper setting, press SELECT (when
1. Refer to the Settings Table. Set the selector to the proper setting, press SELECT (when instructed to
instructed to do so), and connect the test leads to the meter.
do so), and connect the test leads to the meter.
2. Refer to "Typical Measurements" for specific measurement instructions.
2. Refer to "Typical Measurements" for specific measurement instructions.
3. Test the unit on a known functioning circuit or component.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the battery
• If the unit does not function as expected on a known functioning circuit, replace the battery and/
and/or fuses.
or fuses.
• If the unit still does not function as expected, call Tempo for technical assistance
• If the unit still does not function as expected, call Greenlee for technical assistance
at 800-642-2155, Option 2.
at +1-815-397-7070.
4. Take the reading from the circuit or component to be tested.
4. Take the reading from the circuit or component to be tested.
Settings Table
To measure this
characteristic ...
All Models
Voltage
(1000 V max)
Resistance
Continuity*
Diode
Voltage (600 mV max)**
Current (8 A max)**
Current (600 mA max)**
Current (6000 µA max)**
This table continues on the next page.
12
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
Set the
selector to this
symbol ...
Ω
and press
SELECT
mV
A mA
A mA
µA
These icons will
appear on the
display ...
and V
and V
MΩ
and Ω
diod (momentarily)
and V
mV
A, or
mA, or
µA, or
10
Connect Connect
the red the black
lead to ... lead to ...
ΩV COM
ΩV COM
ΩV COM
A COM
mA µA COM
mA µA COM