Technical Specifications; Afety Tips; Risk Of Electric Shock - NATURA THERMO CHEF Manual De Instrucciones

16
2. T
ECHNICAL SPECIFICATIONS
1. Voltage input: 220-240V AC; 50/60Hz
2. Rated power: 1550W. Motor power: 550W. Heating plate: 1000W
3. Working voltage of the control panel: 5V-12VDC
4. Technical parameters of the main electrical machine:
• Working voltage: 220-240V AC; 50/60Hz
• Maximum rotation speed: 8700 RPM/Min
5. Display type: LCD display + white backlight
6. Heating system: Resistance heating in the bottom of the bowl
• Includes overheating protection device
7. Electronic scale: maximum weight 3 Kg
8. Main body: high-quality ABS plastic
9. Bowl: stainless steel, maximum capacity 2 Litres
10. Length of supply cord: 1,2 M
3. S

AFETY TIPS

The appliance should not be used by mentally retarded or disabled persons,
except under the supervision of adults.
ThermoChef Natura multifunctional food processor can be used at home or
for professional purposes. This appliance complies with the highest safety
standards. However, it is very important for you to read the following safety tips in
order to avoid the risk of domestic accidents or malfunctioning of the appliance:

RISK OF ELECTRIC SHOCK

• Unplug the appliance before cleaning it or if you intend to put it away for a
long time.
• Do not immerse the ThermoChef Natura main body in water or wash it with
a great amount of water. Just clean it with a wet cloth and avoid water or
other foreign elements from getting into the main body.
4
19
18
17
FAULT CODES AND SOLUTION METHODS
Fault
Code meaning Possible reasons
code
E0 • Bowl or lid not • You forgot to put the lid
installed on. The bowl lid or the
steamer are not
correctly installed on
the bowl.
E2 • Bowl overheating • There is no water or the
water has boiled away
in the bowl during
heating.
E3
• Motor overheating • Motor overheating due
to prolonged use of the
appliance or excessive
quantity of food in the
bowl.
E4
• Electronic overweight • The ingredients on the
scale plate weigh over
3 Kg.
E5 • Motor stall or • The motor is blocked
overload because of overload
due to an excessive
quantity of food in the
bowl.
E6 • Motor temperature • The motor temperature
sensor warning sensor is damaged.
E7 • Bowl connection • The bowl is not
error installed.
The bowl is not correctly
installed.
The bowl temperature
sensor is damaged.
Solution methods
• Put the lid on the bowl
and make sure that both
parts are properly
connected.
• Wait until the
temperature in the bowl
falls to room
temperature.
• Wait until the motor
temperature falls to
room temperature.
• Remove some
ingredients from the
scale plate.
• Reduce the food
proportion inside the
bowl. Unplug the
appliance and then plug
it again into the main
outlet.
• Contact our Customer
Service Center.
• Make sure that the bowl
is properly installed.
Unplug the appliance
and then plug it again
into the main outlet.
21