Idiomas disponibles
Idiomas disponibles
TO CUSTOMERS
Thank you for your support and trust on purchasing the products of our
company. To fully exert the function of the product, we suggest you to read
the operating instruction carefully before using it, for the convenience of
grasping the connection method and using points. Please take care of the
operating instruction after reading it for the purpose of further reference.
SPECIFICATIONS
4-inch x2 Subwoofer speakers
10M Bluetooth range
Brilliant LED lights
True Wireless Speaker (TWS Link+)
TF card slot, AUX input, USB input
Microphone input
ACCESSORIES
Remote Control
Charging Cable
Auxiliary Cable
Detachable strap
OPERATING BLUETOOTH MODE
• Bluetooth version: 5.0 version, works within a 10 meter operating range
• After the power is turned ON, the Led screen display will flash "BLUE"
and the speaker will indicate that it is ready for a bluetooth connection
with an audible tone
• Turn on your mobile device and put it in Bluetooth mode, search for the
device name "PABT6018" and confirm the connection when it appears
• Once the pairing is successfully, the speaker will emit another beep tone,
and the "BLUE" character will stay lit on the screen
OPERATING TF/MICRO SD MODE
• Insert a TF card speaker and the speaker will detect the card and change
its status to TF mode
• The character "PLAY" will appear on the led screen and will start playing
the music stored on the TF or MicroSD card
• The display will show "PLAY" during playback and "PAUS" will its paused
FM radio function
100W (PMPO) Output power
1200mAh battery capacity
DC 5V Charging port
Frequency response 150Hz-18khz
MODE CYCLE
Press "MODE" button to switch
USB
TF
BT
FM
AUX
OPERATING USB disk MODE
• Inserting a USB drive into the speaker, it will automatically be detected by
the device and will begin to playback the music stored in the drive
• The display will show "PLAY" during playback and "PAUS" will its paused
OPERATING FM MODE
• Press the button "MODE", enter into FM mode
• This speaker has a built-in radio antenna, doesn't need an external antenna
• Press and hold the button "PLAY/PAUSE" to automatically search the radio
stations; press the same button again to pause the scanning
OPERATING AUX MODE
• Plug one end of the 3.5mm audio cable into the speaker's AUX jack, and
the other end to your mobile device (cellphone, laptop, tablet, etc)
• The speaker will automatically detect the plugin to change to AUX mode
and will begin playback of the music streaming on your mobile device
• Control your music from the play/pause or forward/backward buttons on
the speaker panel or directly from the mobile device.
OPERATING LED FUNCTION
• Press and hold 'MODE' button to turn ON or OFF the LED display lights
OPERATING TWS FUNCTION
• Begin by using your mobile device to succcessfullly pair one of 2 bluetooth
speakers on Bluetooth mode.
• When pairing is successfully, move onto the second speaker. Make sure
that speaker #2 is on bluetooth mode as well and double click the
"PLAY/PAUSE" button to turn on its TWS mode.
• If both speakers are close to each willing pairing, they should quicly
connect together and begin to play your music simultaneously.
CHARGING
• Take the USB charging cable and plug it into the DC 5V charging port.
And charge it directly into a wall plug or into a computer USB port to charge
• To make sure your speaker is being charged, look for the charging indica-
tor located on the right side of the LED screen. It will light up when charging
and will stop lighting up when the speaker is fully charged.
