Operating; Process Controls; Control Panel - SEAL 62S Manual De Uso

5 OPERATING

This chapter describes the function of the controls and indicators, the operating modes,
how to set up and operate the machine and a number of applications.
The sections in this chapter are placed in a sequence in which the information is needed
for laminating processes.
For the mounting process the sections 5.3 and 5.4 can be skipped with the exception of
setting the pressure (see section 5.3.6).
5.1

Process controls

This section gives an overview of the functions of the controls on the control panel
(Figure 9), the heater control (Figure 10) and elsewhere on the machine (Figure 11).
Note:
Switch on the heaters approximately 1 hour before use, if a process requires the rollers
to be heated. Close the nip and let the machine run at low speed, to avoid uneven hot
spots.
5.1.1

Control panel

This paragraph describes the controls and indicators on the control panel.
When LED's are blinking, this indicates an error. Refer to 5.1.3 for their meaning.
Figure 9: Control panel
20 User Manual 62S