Active Era LUXURY AIR BED Manual De Instrucciones página 4

Inflation Option
If electrical power is not available, then a conventional foot or manual
operated air pump can be connected to the air bed.
Deflation
Open the cover at the side of the air bed
1.
where the power cord is stored.
Make sure the manual inflation valve is
2.
closed.
Plug the power cord into an electrical
3.
outlet.
Turn the control dial anti-clockwise until
4.
the arrow points to DEFLATE (Image 3).
The air bed will take up to 3 minutes to
5.
deflate.
When the air bed is fully deflated, turn
6.
the control dial one click clockwise until
the arrow points to OFF.
Unplug the cord and store in the power
7.
cord compartment.
Storage
Deflate the air bed following the 'deflation' instructions.
1.
Make sure the air bed is clean and dry.
2.
Lay bed flat with sleeping surface facing upwards. Fold the air bed loosely
3.
and avoid sharp bends, corners and creases which can damage the air bed.
Store the air bed in a cool and dry location.
4.
3 | English
INFLATE
OFF
DEFLATE
(3)