Microphone Connection; Antenna Installation; Power Connection - Pihernz DYNASCAN 10M Manual De Instrucciones

MICROPHONE CONNECTION:

1.- Plug microphone connector into jack.
2.- To remove the microphone, pull on the screw for microphone connector.

ANTENNA INSTALLATION:

Before using this transceiver, install a high efficient and harmonious adjusted 10 meters antenna,
suitable antenna type and correct installation will bring excellent communication.
To match with the transceiver, the antenna and cable shall with characteristic impedance of 50 Ω,
otherwise the antenna system will not efficient enough and will disturb TV, radio or other
electronics equipment's.
1.- Screw the antenna connector into the transceiver antenna jack.
2.- Grounding the antenna system to ensure best performance of this transceiver.
WARNING:
- Connect antenna firstly before transmitting, or it might damage the transceiver.
- To avoid the risk of fire, electric shock, radio damage, all base station shall equip of
lightning protector.
- Be sure choose a matching antenna, you may enquiry our salesperson.
The position of antenna can be put as following example:

POWER CONNECTION:

This transceiver operates with 13.8 VDC power supply, never connect it to 24 VDC battery. The
13.8 VDC car battery shall with sufficient current, or the LCD will become dark and transmit power
will drop down.
English - 6 -