Resistance Measurement - Powerfix KH 3322 Instrucciones De Uso

Resistance measurement

Caution!
Before attachment of the measurement leads, the object being tested must
be de-energised, so as not to damage the device or the object being tested. In
cases of doubt, the freedom from energy must be proved by measurement.
• Place the function switch
• If necessary, press the button
in the display
• Insert the measuring leads
COM
8
and .
• Connect the measurement prods with the object being tested.
The measured value is shown in the display
Kiloohm (kΩ) or Ohm (Ω).
Adjusting the measurement conclusion
• Press the button
manual measurement conclusion.
The indicator AUTO extinguishes.
q
at the position
FUNC.
z
.
RANGE
e
once to switch from the automatic to the
.
r
until the indicator MΩ appears
into the input sockets
z
in Megaohm (MΩ),
- 97 -
VΩ
7