fig.2-29_30
6
Set "MIDI output".
Select [Single instrument],
and choose one of the
following from the list that
appears, and click [Apply].
MIDI output
7
Close the Multimedia Properties dialog box.
Click [OK] to complete the settings.
This completes MIDI and audio input/output destination
settings. If you installed the standard Windows driver, make
settings for the Windows volume control.
Proceed to the next section.
Advanced mode
EDIROL UA-20 MIDI OUT
Volume Control setting (p. 40)
Getting Connected and Installing Drivers (Windows)
Standard driver mode
MIDI cannot be handled when
using Standard Driver mode.
For details on Advanced
mode and Standard Driver
mode, refer to Advanced
mode and Standard driver
mode (p. 16).
39
Solución de problemas
