Olympus m:robe MR-100 Manual Del Usuario página 51

Problem
There is no sound.
The m:robe functions
cannot be operated.
The reaction of the Touch
Panel is slow.
A file that you have
transferred is not found.
The device becomes hot.
Synchronization is not
happening.
The battery discharges
soon after charging.
Cause
The volume is set to the
minimum.
The remote or headphones
are not connected properly.
The HOLD function is set
to ON.
The reaction is slow if the
surface of the Touch Panel
or your hands are wet.
The file was transferred
using Windows Explorer,
etc.
The temperature of the
device increases after
extended periods of
operation.
The device is turned off.
The built-in battery is good
for about 500 complete
charges and discharges,
depending on usage.
Resolution
Adjust the volume on the
device or remote.
Check the headphones, the
extension cable/remote and
the device properly.
Slide back the HOLD
switch to release the
HOLD function.
Wipe moisture from the
device and your hands to
improve response time.
Files that are not
transferred from the
supplied Music/Photo
Organization Software
"m:trip" cannot be
displayed. Synchronize
with m:trip.
This is not a malfunction.
Turn the power on.
If the battery soon becomes
dead, contact your local
Olympus customer support
center for a replacement.
Troubleshooting
Page
gpage 32
gpage 26, 38
gpage 28
—
gpage 22
—
gpage 23
gpage 16
EN-51