Idiomas disponibles
Idiomas disponibles
G Operating instruction
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference.
1. Safety Notes
The product is intended for private, non-commercial use only. The product is
intended for indoor use only. Use the product for its intended purpose only.
Children are not permitted to play with the device. Protect the product from dirt,
moisture and overheating, and only use it in a dry environment. The product
may only be operated with the type of power supply network described on
the name plate. Only connect the product to a socket that has been approved
for the device. The electrical socket must always be easily accessible. The
overvoltage protector may be operated only on a 16 A fused mains socket with
a properly installed protective conductor. Do not connect to extension cables,
power strips or adapters. Never connect multiple units of this product in series.
Disconnect the product from the network using the power button – if this is not
available, unplug the power cord from the socket. Do not continue to operate
the device if it becomes visibly damaged. Do not attempt to service or repair the
product yourself. Leave any and all service work to qualified experts.
2. Proper use
The built-in overvoltage protector is designed for mains-related overvoltage
caused by switching processes or distant lightning strikes. Additional measures
must be taken to safeguard against direct lightning strikes. Coarse protection
(requirement clause) must be provided for in the building's electrical system.
The primary intended purpose of the product is to protect high-quality
telephone and computer systems and audio, video and satellite devices.
3. Connection
All devices must be switched off before devices can be connected. The
overvoltage protector may be connected only between the electrical consumer
and an earthed socket. In the operational state, the indicator light for the
overvoltage protector lights up.
Warning
If the indicator light is not lit after switching on, the overvoltage protector
is defective – it may no longer be used and must be exchanged for a new
overvoltage protector.
4
