Fm Radio Operation - Lenco SCD-685BK Manual De Usuario

FM RADIO OPERATION

Auto Scan
1. Turn on the unit in FM mode.
2. Press the SCAN button to scan for the next available FM station.
Manual Scan
1. Press the TUNE- or
2. Alternatively press and hold the
Storing FM Presets
You can save up to 20 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the PRESET button. Flashing preset channel number will be displayed.
3. Press the TUNE- or
save.
Recall FM Presets
1. Press the PRESET button. Steady preset channel number will be displayed.
2. Press the TUNE- or
tune to the preset channel.
Stereo/Force Mono Selection
When receiving a stereo broadcast FM station, press the FM ST/MO button will switch between stereo audio or force
mono audio.
Displaying FM Station Information
There are several types of information as listed below. To change the display information press the INFO button
repeatedly.
1. Radio Text
Scrolling text with information on music titles or program details provided by the broadcaster.
2. Program Type (PTY)
Type of program provided by the broadcaster.
3. Signal Strength
The signal strength bar is displayed to show the current receive signal strength. The more the rectangles are filled, the
stronger the signal is received. The unfilled rectangle on the left side is a threshold level where the signal strength
received should exceed this threshold. To improve the reception adjust the antenna position.
4. Time and Date
The real time and current date provided by the broadcaster.
5. Frequency
Current channel frequency.
OTHER FM MENU OPERATION
Press the MENU button to access the menu control. Then press the
described below.
Scan Setting
1. Press the MENU button to access the menu control.
2. Press the TUNE- or
3. Press the TUNE- or
ENTER button confirm. When "All stations" is selected, all stations will be detected during FM scanning even if the
radio station is noisy. When the "Strong only" is selected, only the strong stations are detected. Scanning will ignore
those noisy stations.
4. The next time doing a FM scan the unit will search for the stations based on this confirmed setting.
5. Press the MENU button to exit the menu control.
Audio Setting
1. Press the MENU button to access the menu control.
2. Press the TUNE- or
3. Press the TUNE- or
button confirm.
4. Press the MENU button to exit the menu control.
TUNE+ button repeatedly to tune to a different frequency.
TUNE- or TUNE+ button to automatically search to the next available station.
TUNE+ button to a preset number that you want to store. Then press the ENTER button to
TUNE+ button to a preset number that you want to recall. Then press the ENTER button to
TUNE+ button until "Scan setting" is displayed and then press the ENTER button.
TUNE+ button to toggle between "All stations" or "Strong only" selections and then press the
TUNE+ button until "Audio Mode" is displayed and then press the ENTER button.
TUNE+ button to toggle between "Stereo" or "Mono" selection and then press the ENTER
TUNE- or
12
TUNE+ button for different options as