EisSound KBSOUND PREMIUM Manual De Uso página 24

6.11 Alarms
The Control Unit is equipped with two alarms that can be individually programmed and can operate in two different modes:
Beep Mode Alarm
Operates whether the Control Unit is off or on.
\
At the time and days programmed, the Control Unit powers on and a specific beep signal is sounded. The alarm 1 and alarm 2
\
beeps are different and have programmable volumes.
It is equipped with a "snooze" function: a short key press of any key returns the Control Unit to its previous state (standby or music)and
\
after 4' the beep signal sounds again.
To completely turn off the alarm, press any key until a continuous beep sounds: it will return to its previous state (standby or music) and
\
the alarm function ends.
If the Control Unit is powered off or on during the "snooze" period, the alarm function ends.
\
Also, if 4' elapse without any key press, the Control Unit returns to its previous state (standby or music) and the alarm function ends.
\
Music Mode Alarm:
Operates only when the Control Unit is off.
\
At the time and days programmed, the Control Unit powers on with the last music channel selected.
\
The volume is programmable and different for each of the two alarms.
\
How Is It Programmed?
Access the program menu. Select the ON/OFF status, time and days of the week the
function should operate, as well as the function mode and volume. See 5.1.
Programming Alarm 1 and 2.
How Are They Activated/Cleared?
By using the quick functions...
The icons indicate the state of the alarms (activated/cleared).
1 2
Key Sequence Display Visual
alarm 1
1 1 PRG
alarm 2
1 2 PRG
abc
alrm1
1 PRG
alrm2
2 PRG
abc
1
23
ENG
2
CC-1140-02.1