Beper 90.910 Manual De Instrucciones página 15

Multifunctional food processor Use instructions
Base station (pag. 2)
1. Steam basket
2. Blender lid
3. Blender bowl handle
4. Blender bowl
5. Blade
6. Base
7. Power indicator
8. Control switch
9. Water tank
10. Steam basket handle
11. Steam basket
12. Steam basket lid
4 Before starting ( pag. 3)
4.1 Unpacking
Carefully unpack the unit and remove all packaging materials. Remove the power plug cover from
pins. Clean all parts except the main unit (see Cleaning and Maintenance), rinse and dry them tho-
roughly, taking care to handle the blending blades carefully.
4.2 Assembly
Steamer Basket Handle
Place the handle in the upward position and slide it upwards to secure to the steamer basket.
Remove the handle from the steam basket in the inverse direction.
Steamer Basket
Place the steamer basket onto the water tank. Make sure the triangle icon on the basket is aligned
to the "unlock" position on the base.
Turn the handle clockwise to the "lock" position. Remove the steamer basket in the inverse direction.
Blades
!!! The blades are very sharp, be careful when handling.
Place the searing ring on the bottom of the blade. Using your hand, hold the top of the blade and
place it through the hole on the bottom of the bowl.
Turn the bowl over with its opening downward, place the blade retention nut on the blade's other end
and twist it anti- clockwise until it locks into position.
Remove the blade in the inverse direction.
Blender Lid
Place the lid on the bowl as the below drawing, turn it anticlockwise until it locks into position.
Remove the blender lid in the inverse direction.
Warning: This unit has an interlocking system. The unit will not operate unless the lid has been
fitted correctly. Do not attempt to start the unit without the lid being correctly placed and locked into
position.
Control switch
a. Reset
b. Steam
c. Off
d. Blend
15