Introduction - Snap-On John Bean MH 310 PRO Manual De Operador

MH 310 PRO
MH 320 PRO
16

Introduction

3.0 Introduction
Congratulations on purchasing the MH
MH 320 PRO bead presser.
Used together with a tire changer, this device helps you
to mount and demount particularly hard tires.
With a minimum of maintenance and care your device
will provide many years of trouble-free operation.
Instructions for use and maintenance are covered in
this manual.
KEEP THIS MANUAL IN A SAFE PLACE FOR
FUTURE REFERENCE.
READ THIS MANUAL CAREFULLY BEFORE USING
THE DEVICE.
Application
MH 310/320 PRO model bead pressers devices are
designed to help you mount and demount car tires.
This device must only be installed on the suggested
tire changer. Please contact you dealer.
These devices must only for the purpose they were
designed for.
Any other use shall be considered improper, therefore
not reasonable. In particular, fi tting on machines not
allowed may cause hazardous conditions.
THE MANUFACTURER SHALL NOT BE CONSIDERED
LIABLE FOR DAMAGE CAUSED BY IMPROPER,
WRONG OR UNREASONABLE USE.
Manuals for the unit
• Operator's Manual (Chapters 1 – 8)
The operator must be familiar with all details.
Installation instructions
The installation instruction are in the Appendices.
This manual is an integral part of the product. Read
the warnings and instructions in this manual carefully,
since they provide important information concerning
safety and maintenance.
Operator's Manual
310 PRO or