Schwaiger HDFS100 Manual De Instrucciones página 16

USER GUIDE
2. When there is no sound:
• Please try to adjust the volume of TV.
• Check cable connection to see if it fits properly.
• Check cable to see if it supports video transmission only (DVI) or
it is damaged already.
• HDCP may not match very well at first connection; please unplug
the power cable to restart HDFS100.
3. When there is no 3D effect, please:
• Make sure 3D function of 3D TV (or 3D DLP Projector) is activat-
ed (set to AUTO or 3D ON).
• Make sure 3D function of 3D source device is activated
(set to AUTO or 3D ON).
• Make sure power of shutter glasses is on.
• Check the power of HDFS100.
• If the 3D HDTV requires an active shutter glasses for 3D viewing,
please make sure the active shutter glasses can match with the
3D TV.
• If the 3D HDTV requires a passive shutter glasses for 3D viewing,
please make sure the passive shutter glasses can match with the
3D TV.
4. If the image is unstable, or snowing image shows on screen.
• You might get interference form other wireless device or heavy
power consumption house ware (ex. WiFi Router, Microwave, air
conditioner...). Please keep HDFS100 away from those sources
of interference.
• The wireless transmission distance may be too far or blocked
by wall or other object. Please place HDFS100 at other location
where you can get good signal and video quality.
• Please change the direction of Transmitter and Receiver to get
better reception.
5. If the wireless connection fails.
• Please make sure the power of source device which you want to
use is turned ON.
• Unplug the power cable to restart HDFS100.
16