Battery Installation - Perel EDB7 Manual Del Usuario

• Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
• Due to constant product improvements, the actual product appearance
might differ from the shown images.
• Product images are for illustrative purposes only.
• Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
• Keep this manual for future reference.
4. Features
• easy installation without any damage thanks to the wireless system
• 36 melodies and adjustable volume (high - medium - low)
• comes with visual indication function
5. Overview
Refer to the illustrations on page 2 of this manual.
1 auto-learning code
2 volume
3 melody

6. Battery Installation

1. Open the transmitter to reveal
the battery compartment. To
do so, slightly push the tab at
the bottom of the transmitter
using a small flat-bladed
screwdriver.
2. Install the CR2032 battery
according to the correct
polarity.
3. Close the battery
compartment.
Remark: Remove the batteries if the transmitter will not be used for a
longer period.
V. 03 – 02/01/2020
EDB7
4 visual indication
5 push button
4 ©Velleman nv