Combustible; Information About Pellets; Pellets Preservation; Starting - VULCANIA POWERFUL 12 Manual Del Usuario - Mantenimiento

Combustible

The combustible to employ must comply with
•
Standard.
It's prohibited to use solid combustible as straw, mais, hazelnut, pinecone or other
•
different from indicated in this handbook. We recommend to employ always certify
combustible UNI EN ISO 17225-2 of Your dealers .

INFORMATION ABOUT PELLETS

Pellets are realized with wood rejections that come from sawmills or from planing shops
•
and with wood fragment of forest industry. This raw material is shattered, dried up,
crushed, without any bound material till up to become the pellet fuel.

PELLETS PRESERVATION

Pellet has to be kept in a dry and clean rooms.
•

STARTING

The appliance should set at work only after having completed the following operations:
•
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations.

WOOD PELLET LOADING

Be careful during wood pellet loading operation ! The pellet bag should not touch the
•
warm appliance.
Be careful that no external corps, such as pieces of bag, wood pieces or other parts, that
•
can obstruct the screw feeder and damage it, enter into the pellet tank.
The load of pellet is done from the top, after having removed the cover. During appliance
•
functioning, it is advisable to employ the specific glove, because the appliance surface
could reach high temperature. Check always the level of fuel in the container and check-
it often, to avoid the light off of the appliance. The cover of the container must be always
closed, except during pellet loading. Pellet container capacity : information on Technical
details part.
ASIC INFORMATION
The stove must be light off and keep it cooling till the ambiance temperature before any
•
maintenance operation start.
Remove the plug after having light off the back switch.
•
Do not disconnect the stove from the electric connection or press the switch back
•
during the operation. This operation can block all engines of the equipment,
hampering the evacuation of fumes inside the stove.
IT IT IT IT- - - - GB GB- - - - FR FR- - - - E E E E S S S S mod. POWERFUL 12
GB GB FR FR
UNI EN ISO 17225-2 A1
44/124