Safety Instructions; General Guidelines; User Manual - HQ-Power VDLL4RL2 Manual Del Usuario

Órgano de luz modular - 4 x 47 leds
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; take it to a specialized company for recycling. Return this device to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPower™! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2.

Safety Instructions

Do not crimp the power cord and protect it against damage.
Warning! A damaged power cord or AC adapter must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage stated in the specifications of
this manual.
Do not use the device when damage to housing or cables is noticed. Do not attempt to service
the device yourself but contact an authorised dealer or service agent.
Always disconnect mains power when device is not in use or when servicing or during
maintenance activities. Handle the power cord by the plug only.
Caution: device heats up during use. Do not touch hot surfaces. Let the device cool down
sufficiently after switching off or before handling.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.
Never put objects filled with liquids on top of or close to the device.
Do not stare directly at the light source, as this may cause
epileptic seizure in sensitive people
temporarily loss of sight (flash blindness)
permanent (irreversible) eye damage.
Install the device at a minimal distance of 0.5 m from flammable and explosive objects or
substances.
Respect a minimum distance of 0.5 m between the device's light output and any illuminated surface.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Install this device in a well-
ventilated place to avoid overheating.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
V. 01 – 17/06/2014
VDLL4RL2

USER MANUAL

3
©Velleman nv
Tabla de contenido
loading

Tabla de contenido