Pc-Controller Connection - ICAR 5LSA Instrucciones De Uso

Setup1:
Close all applications if open
−
Insert the CD in the drive
−
− Under the Setup1 directory, run the setup.exe program
Press the button with the icon of a PC to start the installation procedure.
−
A window appears with a request to specify the directory where to install the program.
−
If the directory is to be changed, specify the new name in the appropriate box.
Follow the instructions given. If the presence is signalled on the PC of files more re-
−
cent than the ones which are about to be installed, keep the files already present
(reply YES or "keep" to the request to retain the files).
Setup2:
Close all applications if open
−
Insert the CD in the drive
−
Under the Setup2 directory, run setup.exe
−
A window appears with a request to specify the directory where to install the program.
−
If the directory is to be changed, specify the new name in the appropriate box.
− If a request to reboot the system is given at the end of the installation, carry out such
procedure.

2.4 PC-CONTROLLER CONNECTION

The practical use of this software assumes connection of the PC to a controller via serial
cable. This cable (supplied as standard with the software) includes an RS232/TTL con-
verter for conversion of the TTL signals present on the rear connector of the control units
into an isolated RS232 signal connectable to the PC.
Connect the end with the telephone jack RJ6 to the controller and the end with the DB9
connector to the serial port of PC. When running the software it is possible to check im-
mediately whether the connection has been made properly.
If the software fails to activate the communication (ONLINE mode), check the number of
the serial port used on the PC with the one selected in the Configuration-Options menu.
N.B.: This type of connection has been designed to be used in the setup, testing or diag-
nostics phases.
For a permanent serial connection it is preferable to use the controllers of the RPA series
provided with serial output RS485.
converter
RS232/TTL
45