Tea Steeping Chart; Before Using For The First Time; Operating Overview; Boil-Dry Protection - Bella 14762 Manual De Instrucciones

Tea Steeping Chart

Perfect the art of tea making. Follow this guide to achieve optimal flavor from different types of tea.
Pre-set Temperature ˚F
Puer 200°F
Green Tea 180°F
Maté Tea 212°F
Oolong Tea 190°F
Black Tea
212°F
Flavored Black Tea 212°F
White Tea 180°F
Flavored White Tea 180°F
Rooibos Tea 180°F
Herbal Tea 180°F

Before Using for the First Time

1. Carefully unpack the Kettle and remove all packaging materials
2. Place the power base on a clean, sturdy, level surface.
3. Fill the Kettle to the MAX water level with clean, cold water. Add the lid. Press firmly to make sure it fits securely.
4. Program the Kettle to boil water following the detailed instructions described in the "Operating
Overview" section of this instruction manual. Discard water and rinse thoroughly. Repeat 2 or 3 times
using cold water to rinse.
IMPORTANT! If the Kettle is ON without sufficient water, a boil-dry protection device will automatically
turn the unit OFF. (See "Boil-dry Protection" explanation.)
5. Wipe the power base with a damp cloth.
SO-315733_14762_Bella_1.8L Touch Ceramic Kettle_Amazon_IM_R8.indd 8-9
Steep Time Caffeine Strength* (% of caffeine)
3-4 mins 65-70%
45 sec-1 min 5-10%
5-6 min 100%
3 min 20%
2-3 min
20%
2-3 min 20%
4-5 min 1%
2 min 1%
5-6 min 0%
5-6 min 0%
8

Operating Overview

IMPORTANT! Always use pure, filtered water for perfect pour over brewing when boiling water to make tea..
1. Place the power base on a clean, sturdy, level surface.
WARNING! The BELLA 1.8L One Touch Programmable Electric Kettle may be used ONLY with the power base
provided. The power base may be used ONLY with the BELLA 1.8L One Touch Programmable Electric Kettle.
2. Make sure the power base is unplugged.
3. Add at least 2 cups cold filtered water to the Kettle; do not fill above the MAX (7.5 cups / 1.8L)
water level. Wipe any excess water from the Kettle's body and power base.
CAUTION: Do not fill the BELLA 1.8L One Touch Programmable Electric Kettle past the MAX water level.
4. Add the lid to the Kettle. Make sure the lid is secure before heating. Place the Kettle securely onto the
heater coils in the center of the power base.
5. Plug the power cord into a 120V AC electrical outlet. ( ) POWER will begin to slowly appear and then slowly
pulse on and off. (See Figure 2, Sleep Mode). When ( ) POWER is pressed, an audible tone can be heard, and
the main menu will appear. (See Figure 3, Main Menu.) Select one of the 5 pre-set water temperatures .
6. Select any of the 5 preset water temperatures (Delicate 160ºF , Green/White tea 180ºF , Oolong 190ºF , French
Press / Puer 200ºF , Black Tea / Boil 212ºF).
7. After 3 seconds, the kettle will start to heat and boil the water.
8. Press (Keep Warm) to maintain the programmed water temperature for 2 hour. (Keep Warm) can be pressed
at any time, before or after the target temperature has been programmed. When active, (Keep Warm) will
slowly pulse on and off. Press the pulsing (Keep Warm) at any time to stop the Kettle from heating.
9. Unplug the power base when not in use and before cleaning.
IMPORTANT: Press ( ) POWER at any time to turn the kettle off.

Boil-Dry Protection

If the BELLA 1.8L One Touch Programmable Electric Kettle is without sufficient water, or if the water has
evaporated, an audible tone will be emitted as the safety thermostat automatically turns the Kettle OFF.
To reset the boil-dry protection device, remove the Kettle from the power base and allow it to cool for at least
15 - 20 seconds. Add the required fresh, cold filtered water to the Kettle and position on the power base heater
coils. Press ( ) POWER to turn the Kettle ON.

User Maintenance Instructions

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself.
Any servicing requiring disassembly must be performed by a qualified appliance repair technician.
Care & Cleaning Instructions
WARNING: Never immerse the BELLA 1.8L One Touch Programmable Electric Kettle, power base, cord, or plug in
water or other liquids.
IMPORTANT: Never use scouring pads or harsh cleansers to clean your Kettle as they may damage the stainless
steel finish.
1. Empty the Kettle after each use. Do not allow water to sit in the Kettle overnight.
2. Make sure the Kettle is unplugged and completely cool before cleaning.
3. Remove the Kettle from the power base. Wipe the inside of the Kettle with a soft, damp cloth until dry.
WARNING: NEVER IMMERSE THE POWER BASE IN WATER.
4. Wipe the power base with a damp cloth or sponge. Dry thoroughly.
5. Use a soft polishing cloth to remove any fingerprints or surface dirt from the body.
WARNING: Do not use harsh chemicals or abrasive cleansers as these may damage the finish of the Kettle.
6. Make sure both the power base and the Kettle's body are completely dry after cleaning and before use.
9
2018-09-13 8:45 AM