ASROCK ALiveNF7G-FullHD Manual Del Usuario página 33

Before installing Windows
is supposed to include SP4. If there is no SP4 included in your disk, please visit the
below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay
2.15.1 Installing Windows 2.15.1 Installing Windows
2.15.1 Installing Windows 2.15.1 Installing Windows 2.15.1 Installing Windows
Functions Functions Functions
Functions Functions
If you want to install Windows
SATA / SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.14.1 step 2 on
page 30.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step1, 2, 3, you can start to install Windows
XP 64-bit OS on your system. At the beginning of Windows
a third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette
containing the NVIDIA ® RAID driver. After reading the floppy disk, the drivers will be
presented. Select the drivers to install. The drivers are as below:
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
Please select A and B for Windows
two RAID drivers needed for RAID mode, you have to select them separately. Please
specify the first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
NOTE. Currently, the RAID driver for Windows
is not ready yet. As long as we get the Windows
XP 64-bit RAID driver, we will update it to our website in the future.
ASRock website http://www.asrock.com
ASRock
® 2000 to your system, your Windows
2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID
2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID
®
® 2000 / Windows ® XP / Windows
Advanced screen
®
2000 / XP / XP 64-bit OS on your system.
®
2000 / Windows
®
2000 / XP / XP 64-bit in RAID mode. (There are
® 2000 / Windows ® XP / Windows
® 2000 / Windows
® 2000 / Windows
ALiveNF7G-FullHD Motherboard
® 2000optical disk
® XP 64-bit on your
IDE Configuration.
® ®
XP / Windows
® setup, press F6 to install
® XP 64-bit on IDE
® XP / Windows ® XP 64-bit OS
® XP / Windows ®
3 3 3 3 3 3
3 3 3 3