Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRODUCT
SPECIFICATIONS
SERIALNUMBER
DATE OF PURCHASE
GASOLINE
CAPACITY/TYPE:
Oi:L TYPE (API-SF/SG/SH):
OIL CAPACITY:
SPARK
PLUG (GAP_
,030")
VALVE
CLEARANCE:
1.6 QUARTS
UNLEADED
REGULAR
SAE 30 (ABOVE
32°F)
SAE 5W-30
(BELOW
32°F_ ..........
20 OZS.
CHAMPION
RJ19LM
OR J19LM
INTAKE:
,004 - ,008
EXHAUST:
.004 - .008
SOLID STATE IGNITION
AIR GAP:
.0t25
IN.
BLADE
BOLT TORQUE:
35-40 FT. LBS.
_nd
script number_,' Wil! be fodn_ on a decal attached
to the rear oth'f'['6"e_
lawn mower
housing.Record
both seria! number
and date of purchase
in space
provided
above.
LAWN MOWER
Always observe safety nJles when performing
any maintenance,
TIRES
° Keep tires free of gasoline, oil, or insect
control chemicals which can harm rubber.
* Avoid stumps, stones, deep ruts, sharp
objects and other hazards that may cause
tire damage.
BLADE
CARE
For best results,
mower
blade must be
kept sharp.
Replace
bent or damaged
blades.
TO REMOVE
BLADE
• Disconnect
spark plug wire from spark
plug and place wire where
it cannot
come in contact
with spark plug.
• Turn lawn mower on its side.
Make
sure air filter and carburetor
are u F
• Use a wood block
between
blade and
mower
housing
to prevent
blade from
turning
when
removing
blade
bolt.
,, Protect
your hands
with gloves and!or
wrap blade with heavy cloth.
° Remove
blade bolt by turning
counter-
clockwise.
° Remove
blade
and attaching
hardware
(boll,
lock washer
and hardened
washer).
NOTE:
Remove
the blade adapter
and
check tile key inside hub of blade adapter.
The key must be in good condition
to work
properly,
Replace
adapter
if damaged.
TO REPLACE
BLADE
,
Position
the blade adapter
on the
engine
crankshaft,
Be sure key in
adapter
and crankshaft
keyway
are
aligned.
° Position
blade
on the blade adapter
aligning
the two (2) holes
in the blade
with the raised
lugs on the adapter,
° Be sure the trailing
edge of blade
(opposite
sharp
edge) is up toward
the
engine.
,, Install the blade bolt with the lock
washer
and hardened
washer
into
blade
adapter
and crankshaft.
• Use block of wo6d
between
blade
and
lawn mower
housing
and tighten
the
blade
bolt, turning
clockwise.
, The recommended
tightening
torque
is
35-40 fl, fbs°
1i
Tabla de contenido
