Operating Time - Grunkel LIQ-85MM Manual De Instrucciones

OPERATING TIME

This machine is designed with button switches of O grading, I grading, II
grading (O for stop, I for weak grading, II for strong grading). For juicing,
select strong grading, for operating time, after operating for 1min, stop for
1min, then use again. After the above operation is performed for three times,
stop for 15 min, do not operate until the motor is cooled, in this way, service
life of this machine will be prolonged, the machine will serve you more
efficiently.
ATTENTIONS
1.This machine is unavailable for the weakness, unresponsive or psychopathic
perosn(including children), unless under the direction or help from the person
who have the responsibility for security. Children should be overseen, so it can
be testified that they are not playing with it.
2.Before using, put this machine on a stable and even table board, operate
according to the above methods.
3.Before juicing, first confirm juicing net and rotor clutched in position, and no
hard contact between juicing net cutter and transparent cover. Put the
transparent cover on, fasten tight the handle, then turn on the machine.
4.Before being used, the motor works in running-in phase, there may be slight
peculiar smell and spark, this is normal, after the motor works for some
period, the above phenomenon will disappear.
5.During juicing, make sure there is not too full juice and residue in the middle
seat and residue cup, if too full, please cut off power supply, clean up, then use
again.
6.During using, do not open the cup cover. In case power supply is on, do not
put hand or any ware into the mixing cup or feed port, otherwise, harmful
accident may occur or this machine may be damaged.
7.In order to prolong service life of this machine, over-temperature protective
device is mounted in the motor. If the motor works for a long time or
overloaded, when over warning temperature, power supply will automatically
cut off. After the motor stops, pull out plug of power supply, wait for the motor
to cool (about for 30 min), use again.
8.During operating, please do not leave, never let children operate this
machine.
9.When this machine works in mixing, mincing or grinding conditions, no-
loaded or over loaded work is strictly prohibited.
10 www.grunkel.com