Audiolab LIVE 16XL Manual De Usuario página 31

DSP Control
Touch AUX5-8(SUB1-4) and FX1-2 on the LCD screen to assign
input channel audio to these channels or buses. To adjust
output level of the channel audio, you can rotate Parame-
ter Adjust knob on the panel. For other icon functions in this
page, they are the same with those in SUB1-4 mode.
6.4 Channel interface
Touch it in Polarity to invert the phase of the selected chan-
nel's signal (to alter the phase by 180 ). If the phase reverse is
active the button will illuminate. The LCD display shows the
phase reverse setting in real time. The Polarity control can be
used to correct audio signals which are out of phase as well
as to cancel/ reinforce each other.
Touch it in Delay Time can engage and disengage the delay
for the selected channel. It will illuminate to indicate that the
delay has been pressed and enabled. The LCD display shows
the delay time in real time. It can be set 300ms at 48K Hz.
LIVE 16XL
ENGLISH VERSION
Please notice that only if the Delay button has been enabled
can its parameter be adjusted.
When Delay icon is engaged, touch it in Delay Time and rotate
the Parameter Adjust knob can control the selected chan-
nel's delay time.
Touch it, the function is the same as Link button.
p. 31