Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. SAFETY INSTRUCTIONS
To ensure the long life of the Smartbot Titan Robot and avoid the risk of injury or damage, you should
follow the safety instructions given below:
-
Read these operating and safety instructions carefully before using the robot.
-
Never try to open or repair the robot yourself, as this will void the product warranty, and you may
damage the robot.
-
Do not use the robot with wet hands, or near a floor-level electrical outlet or fire.
-
Make sure that there are no small or fragile objects, power cords, rug fringes etc. in the area you
want to clean.
-
Make sure you do not step or sit on the robot.
-
After the robot has finishing cleaning, walk carefully as the floor may be slippery.
-
Use the robot only in interior rooms and on solid, flat floors.
-
Do not use the robot if there are any objects or liquid spills in the area you want to clean.
-
Always clean the robot´s sensors before using it.
-
Do not use the wet mopping mode on very delicate surfaces.
-
If there are children or pets present, the robot should only be used under the supervision of an adult.
2. DESCRIPTION OF THE ROBOT
a. Smartbot Titan Robot parts
⑫ Control panel
⑬ Handle
⑭ Power adapter socket
⑮ Side-mounted anti-collision sensor
⑯ Water tank
⑰ Front anti-collision sensor
⑱ Velcro
⑲ Water-spray hole
⑳ Anti-falling sensor
21 Battery compartment
22 Sensor sensitivity selector
b. Control panel and screen
⑤ Screen
⑥ Timer button to set the cleaning time (90-30-40-50-60-70-80 minutes)
⑦ Mode button to set the cleaning mode (A-1-2-3-A)
⑧ On/Off button. Press it once to switch the robot on, and press and hold for 3 seconds to switch
it off.
CLEANING MODES
A: Automatic cleaning mode
1: Random cleaning pattern
2: Zigzag cleaning pattern
3: Wall-following cleaning
pattern
c. Accessories
⑤ Microfiber wet mop cloths (2 units)
⑥ Microfiber dry mop cloths (2 units)
⑦ Power adapter
⑧ Water tank
English
Dry mopping
Wet mopping
6
Tabla de contenido
